Phone : +91-79-25890034
Email: info@bthelectricals.com

Air Plasma Cutting Machine

Wie al veel platforms heeft uitgeprobeerd, herkent bij moi casino nederlands snel de professionele aanpak. Speelsessies kunnen naadloos tussen desktop en smartphone worden voortgezet. Ook klassieke pokervarianten zoals Casino Hold’em worden in live vorm aangeboden. Toernooien met aantrekkelijke prijzenpotten vinden maandelijks plaats en versterken de community. Het platform publiceert jaarlijkse transparantierapporten over zijn uitkeringspercentages. Spelers kunnen feedback direct naar het supportteam sturen en zo bijdragen aan de doorontwikkeling. De filters maken gelijktijdige selectie van meerdere criteria voor gerichte zoekopdrachten mogelijk. Video-pokervarianten vormen een spannend alternatief op de klassieke gokkasten. Het casino overtuigt met een combinatie van substantie, stijl en degelijke technische uitvoering.

Air Plasma Cutting

Product Profile :

Air when heated upto 30000’c undergoes ionic change and reaches the fourth state of matter. namely Plasma Instead of expensive Argon or Nitrogen gas only air is used for cutting and cooling which ensures high economy. The cutting speed achieved ensures high productivity.

Operating cost of air plasma is very low.

  • It avoids distortion and gives fine cut finish.
  • Very little post cutting operation is required
  • Metal wastage is minimised.
  • Job does not get over heated as compared to any other conventional methods.

APPLICATIONS :

Air plasma can be used to cut the following metals :

Mild Steel Stainless Steel Carbon and Alloy steel Aluminum and its alloys Copper Casting Bronze and Brass Manganese Steel ‘Special Alloys, Etc.

SPECIAL MACHINE FEATURES :

  • Conventional rectifier based air plasma metal cutting machines.
  • TPower source is of full bridge rectifier design with three diode modules (isolated body) mounted on
    single heat sink.
  • Power source has total safety and capability to work on generator and tolerating generator power
    surges and fluctuations.
  • Input supply indication.
  • High input supply voltage range
  • High temperature protection with indication.
  • Low air pressure cut off mechanism with indication.
  • Superior cutting quality.
  • High open circuit voltage for good arc striking.
  • Efficiency of power source is more than 60%.
  • 100% duty cycle at full cutting current for hand cutting operation.
  • Fiber glass coated insulated transformer windings.
  • CRGO transformer lamination.
  • Forced air cooled transformer design.
  • All PCB’s are coated with strong insulation to protect them against humidity, moisture and metallic dust.
  • Compact and light weight design and good layout for easy servicing.
  • The machine supports the cutting torch cable of 30 mtrs. without compromising on cut quality and
    capacity in all types of cutting modes.
  • The torch is capable of doing underwater cutting as well as cutting under the spray of water jet.
  • Options of light-weight air cooled hand operated or machine operated plasma cutting torch.
  • Power source has unique feature for cutting with pilot arc cutting.
  • Pilot arc ensures main arc striking on rusty and coated surfaces.
  • The power source is of INDIAN origin.

Quality epoxy powder coating for longer lasting effect.

TECHNICAL SPECIFICATION OF AIR PLASMA CUTTING MACHINE
Model No. Plasma 40 Plasma 50
Primary Voltage 380-440 volts A/C, 3 phase, 50 Hz 380-440 voltsA/C, 3 phase, 50 Hz
Secondary Voltage 260-280 volts 260-280 volts
Line Current 69 amps 75 amps
Arc Current 135 amps 155 amps
Q.C.V. (No Load) 320 – 350 V DC 320 – 350 V DC
Power Rating 48 KVA 52.5 KVA
Insulation F Class F Class
Duty Cycle 100%AT Full Load Current of 135 Amp 100% at full load current of 150 Amp
Cutting Capacity For SS Clean Cut For SS Parting Cut 45mm
50mm		 55mm
65mm
For SS clean cut 40 mm 50 mm
For SS parting cut 45 mm 55 mm
Cooling Forced air cooled Forced air cooled
Class of Protection IP 23 IP 23
Gas supply Clean, dry, oil free air Clean, dry, oil free air
Flow pressure 70 psi (4.8) bar at 11 cfm 70 psi (4.8) bar at 11 cfm
Dimensions (L. W. H.) 1085 mm. 680 mm. 805 mm. 1085 mm. 680 mm. 805 mm
Weight 360 kg. approx 370 kg. approx
Model No. Plasma 10 Plasma 16 Plasma 30
Input supply 415 volts A/C, 3 phase, 50 Hz 415 volts A/C, 3 phase, 50 Hz 415 volts A/C, 3 phase, 50 Hz
Operating supply voltage range 380 volts A/C to 460 volts A/C 380 volts A/C to 460 volts A/C 380 volts A/C to 460 volts A/C
Input power 23.4 KVA at 60 amps. 28.9 KVA at 80- amps 37.82 KVA at 105 amps.
Cutting current 60 amps. dc 80 amps. dc 105 amps. dc
Cutting current control No control No control. No control.
Open circuit voltage
At 415 volts input 350 volts dc 350 volts dc 350 volts dc
Duty cycle @ 40 deg. cel. amb 90% at 60 amps 90% at 80 amps. 90% at 105 amps
Pilot arc ignition

Built in high frequency/td>

Built in high frequency Built in high frequency
Class of insulation

F class/td>

F class F class
Class of protection

IP 23/td>

IP 23 IP 23
Cooling

Forced air cooled/td>

Forced air cooled Forced air cooled
Cutting capacity
SS clean cut 10 mm. 16 mm. 30 mm.
Max. rough cut 16 mm. 20 mm. 40 mm.
Gas supply Clean, dry, oil free air Clean, dry, oil free air Clean, dry, oil free air
Flow pressure 70 psi (4.8) bar at 11 cfm 70 psi (4.8) bar at 11 cfm 70 psi (4.8) bar at 11 cfm
Dimensions (L. W. H.) 910 mm. 475 mm. 755 mm 910 mm. 475 mm. 755 mm 910 mm. 475 mm. 755 mm
Weight 150 kg. approx. 160 kg. approx. 190 kg. approx

 

The above specification are subject to continuours Research and Development works undertaken,
hence the company reserves the right to change them without prior notice.

We undertake repairs of all types of welding machine (any make & any capacity)

 

error: